Counter Ejectors & Mini Counter Ejectors
We offer a range of Counter Ejectors to meet your needs, and unlike some
companies, we can also handle the installation. Installation can usually be
accomplished in one working day. Since 1982, we've installed hundreds of
Counter Ejectors worldwide.
We can also claim to be one of them of the most experienced, if not THE most
experienced company to offer retrofit counter-ejectors. We have installed behind
everything from from Koppers, to Curioni Mini-Downfolds. We can install
behind any machine successfully, without limiting the machines capabilities.
Our lead time is down to 12 weeks!
Available Sizes:
CE20 (Mini) 23 X 60
CE35 (35") 35 X 80 Range
CE50 (50") 50 X 110 Range
We have also manufactured machines for 66"
and Larger. Our largest installation is 110 x 200.
Entrance belts of counter-ejector.
On all top fold folders we install
independently controlled variable
speed top belts. These aid in the
squaring of the panels of the box.
Each belt driven by a 3HP motor
and follows speed of machine with
a potentiometer to allow over speed
of up to 15%.
Available Options:
Hopper of Counter-Ejector. Squaring
Section (yellow bar) moves straight
in and out as opposed to paddling
like many. This allows the bar to
"straighten, if possible, the out of
square panel instead of just bending
it down. The hold downs,
compression section and pusher are
all adjustable laterally.
Compression section adjustable with
linear actuator. Entire upper section
to include the compression section,
kicker, and hold downs adjustable
laterally. View of exit belts. When
bundle is ejected, it is ejected either
6, 8, 10, or 12 inches depending on
machine size. The bundle is ejected
onto the belts and the belts drive the
bundle onto the skate conveyor.
Bundle remains under compression
until it reaches the end of the machine. Exit height typically
borderline of folder plus 6".
Components:
Main Drive is a Magnetek Vector Drive. 10HP on both 35 and 50" machines,
5Hp on mini's and bigger if necessary on larger CE's.
We use a Dynapar Ambassador series counter with a photo eye mounted at
the entrance to the hopper to assure accurate bundle count.
All drive components are Gates Polychain for superior wear resistance.
Kicker mounted using IKO 25mm Linear bearings.
Minimal spare parts requirements.
Very reliable machines, lack of down time and maintenance issues a plus
for our machinery. All models or sizes very simple to work on.
Owner and operator manual includes original manufacturers part numbers.
We try to use parts that are readily available in most any area.
Die Cut Option for running die cuts or outside glue on down fold machines.
Up to a 60" boardline.
Side Guides for running smaller than usual (width across machine) than
normal boxes. Standard on Minis.
Optional bundle separator for improved bundle count accuracy.
Die Cut Option:
Servo controlled, aluminum "lift" rollers
triggered by the trailing edge of each box
clearing a photo-eye.
The lift rollers rotate one revolution to pick-
up and hold trailing edge of box to allow
clearance for next box.
Adding the Die Cut Option does not reduce
the maximum speed of the Counter Ejector!
DOWNLOAD OUR
COUNTER EJECTOR
PDF CATALOG
959 KB
